Analogue VU meter
The Analogue VU Meter will display the value of any control or indicator dragged onto it. The appearance of this object may be changed by adjusting the properties. Details of the control or indicator which the Analogue VU Meter represents are shown in controlled parameters.
Properties
Centre
Centers the scale text horizontally.
Show Scale
Shows the scale on the control.
Subrange
Reduces the range of the control within the Subrange Min and Max user settings.
Subrange Minimum
Sets the low limit for the control within the Subrange.
Subrange Maximum
Sets the high limit for the control within the Subrange.
User Value
Allows you to set your own values for the scale instead of the true values.
User Value Minimum
Set the minimum user value to a number between 0 and 1000.
User Value Maximum
Set the maximum user value to a number between 0 and 1000.
Tick Positions
Set the values at which to show ticks on the scale.
Mark Type
Sets the style of tick marks to be used on the scale. Choose between Line, Circle and None.
Colour
Sets the colour of the scale.
Font
Sets the font style to be used on the scale.
Major Tick Size
The size in pixels used for the major tick marks.
Minor Tick Size
The size in pixels used for the minor tick marks.
Scale Adjust
Adjusts the position of the scale relative to the control. (-256 to +256)
Gap Size
Gap size between text and tick marks.
Angle of Operation
Sets the Angular swing of the meter. (10 to 120)
Needle Colour
Sets the colour of the needle.
Width of Needle
Sets the width of the needle. (1 to 10)
Orientation
Sets the orientation of the meter. (up, down, left and right)
Start Angle of First Arc
Sets the start angle of the first arc.
Arc 1 Colour
Sets the colour of the first arc.
Start Angle of Second Arc
Sets the start angle of the second arc.
Arc 2 Colour
Sets the colour of the second arc.
Start Angle of Third Arc
Sets the start angle of the third arc.
Arc 3 Colour
Sets the colour of the third arc.